7
Setting Ink
1
Take out the 2L ink pack.
• Take out the 2L ink pack and the IC chip from a small cardboard
box.
2
Mount the IC chip on the middle cartridge.
3
Put the 2L ink pack into the
2L eco case.
(1) Open the 2L eco case as shown on the right.
(2) Tear off the seal on the connector of the 2L ink pack.
Be careful of the IC chip direction. If it is set in
the wrong direction, ink is not supplied properly.
If there is a seal remaining, when remove 2L ink pack from the pedestal base, there is a
possibility that ink leaks in large quantities. Please be careful so that there is no seal remaining.
2L ink pack
IC chip
Middle cartridge
IC chip
Insert the chip facing the metal side to the left.
Do not touch the metal part while inserting.
(The IC chip may be damaged by static
electricity.)
(2) open to right
and left.
(1) While pressing
the finger grip,
Seal remaining
No Good
Good
