MIMAKI Kebab MKII, Руководство по эксплуатации

Страница: 42 / 56

Create data to be drawn
42
Create data to be drawn
Create data to be drawn on the work.
Measure the work size
First, measure the correct work size.
You have to check the sizes below in advance to draw.

Size of the following illustration (A: circumference of the work, B: height of the work)

Size of the drawing data to be printed on the work
(Work circumference =A / work height =B)
• Create data to be drawn in the format below:
PS, EPS, TIFF, JPEG, BMP and PDF1.4
• Prepare the development work data for drawing.
• We recommend that you create the data for drawing at the actual print size. If you enlarge or reduce the
size after the data for drawing has been read with RasterLink6, the aspect ratio of the image may be
changed, and so on.
Height and width of development diagram
A
(Cir
cu
mferen
ce
o
f th
e
wo
rk)
B (Height of work)
B
(Height of work)
A (Circumference
of the work)