MIMAKI Kebab MKII, Руководство по эксплуатации

Страница: 37 / 56

Use the origin mark detection
37
Use the origin mark detection
When you use the origin mark detection, the origin mark attached to the work for each drawing is detected. You can
reduce the misalignment of drawing in the rotation direction of the work as the starting point of drawing is aligned.
To use the origin mark detection function, you need to make the setting on the printer in the following procedure.
Set the origin mark detection
1
Press the key in the local mode.
2
Press to select [SET UP].
3
Press the key.
4
Press to select [Kebab Tool].
5
Press the key.
6
Press the key.
• Select the origin mark detection.
7
Press to select ON/OFF.
• When you set it to ON, the origin mark is detected at the following timing:
(1) Before drawing
(2) When you finish setting the work.
(3) When starting Kebab origin point settings.
8
Press the key.
• You can set the origin mark detection.
• Press the
key several times to end the setting.
• The origin mark detection function is only available for the work with a large diameter.
• When you turn off the printer, the setting for the origin mark detection is reset. If you want to use the
origin mark detection function, make the settings again when you turn on the power.
M E N U 1 / 3
WO R K S E T >
FUNC1
M E N U 2 / 3
S E T U P >
ENTER
S E T U P 3 / 3
K e b a b T o o l >
ENTER
ENTER
K e b a b T o o l
O r g i n M a r k S e a r c h O N
ENTER
END