MIMAKI JV5-320DS Скачать руководство пользователя страница 84

Страница: 84 / 140

6 Operation for Functions

6-16

Invoking MACHINE SETUP functions

List of functions

This section describes briefly the machine setup functions and their setting values.

Functions of [INFORMATION] key

This section describes briefly the [INFORMATION] functions and their setting values.

Name

Function

Page in this

manual

REAR MIST FAN

Set the mist fan in the rear of the machine.

P.6-17

Feeding/TakeUP

For heavy-duty feeding / take-up device, set whether to use or not to

use.

In addition, sets the position of the tension bar (LOW/HIGH).

P.6-17

DRYNESS FEED

Change the feed operation after printing.

P.6-18

CONFIRM. FEED

Set whether or not to perform feeding the media after test printing for
checking of the printing result.

P.6-18

PRE-FEED METHOD

Switch the pre-feed operation method.

P.6-18

HEATER SETUP

Change the temperature range of the post-heater that determines whether
the temperature is reached.

P.6-18

TIME SET

Set the date and time on the printer.

P.6-18

UNIT SETUP

Change the units of temperature, length and area to be used with the printer.

P.6-19

STAMP SETUP

Make settings for outputting the date and time and printing conditions after
printing.

P.6-19

CART. PRIORITY

You can select the cartridge status to use first with the double cartridge
function of ink supply.

P.6-20

Test Draw Arrange

You can set the placement direction of the drawn test pattern when perform-
ing test drawing repeatedly.

P.6-20

MACHINE NAME

When the printer is connected through the USB 2.0 interface to a system to
which two or more machines are connected, set the identifier of the printer
to have the system recognize it.

P.6-20

INFORMATION

Displays various information.
In Local Mode, it can also display by pressing the [INFORMATION] key.

P.6-20

Name

Function

Page in this

manual

ERROR HISTORY

Displays the history of errors.

P.6-21

MAINTE. HISTORY

Displays the records of the date and time when maintenance functions were
used.

P.6-21

PRT.modeHISTORY

Displays the history of information (printing conditions) of the online print-
ing that has been performed up to now.

P.6-21

LIST

Prints the data for the operator to check the settings of the printer.

P.6-21

VERSION

Displays various version information of the equipment.

P.6-24

Serial&DealerNo

Displays serial No. and dealer No. of the printer.

P.6-24

Downloaded From ManualsPrinter.com Manuals

Содержание JV5-320DS













































































































































Результаты поиска

Содержание JV5-320DS

Отзывы:

Похожие инструкции для JV5-320DS

Бренды по названию

Популярные бренды

MIMAKI JV5-320DS, Руководство по эксплуатации

Результаты поиска

Содержание JV5-320DS

Отзывы:

Похожие инструкции для JV5-320DS

Бренды по названию

Популярные бренды