MIMAKI JV5-320DS Скачать руководство пользователя страница 43

Страница: 43 / 140

3-13

Setting the media on the printer

[6]Set the media press

This machine has two types of media press depending on the media type.

For fabric media

Prepare the media press for fabric media.

Paste the media press on both edges of the media.

Make arrow marks on the media press matches the edge surface of
the media.

The media press is very edged. Be careful about its handling.

When setting media, be sure to set the media press on the proper position.

The media press of this machine also functions as the detection plate to detect the

media width. If the media press is not set on the proper position, the media width can-
not be detected properly.

When using thick media (of 0.5 mm and above), do not attach the media press. In this

case, the automatic detection of the media cannot be performed. Detect the media
referring to P.3-10 “If the media cannot be detected automatically”.

If there is a screw on the position on which you wished to paste the media press and if

you paste the media press as it is, the media press will be lifted.

If the pasted media press is lifted, set the media again (adjust it by moving setting posi-

tion of the media to right and left).

To set the media on the proper position, refer to P.3-6 “Setting position for fabric

media".

Arrow
marks

Downloaded From ManualsPrinter.com Manuals

Содержание JV5-320DS













































































































































Результаты поиска

Содержание JV5-320DS

Отзывы:

MIMAKI JV5-320DS, Руководство по эксплуатации, Страница: 43 / 140

Результаты поиска

Содержание JV5-320DS

Отзывы: