MIMAKI JV4 Series, Руководство по эксплуатации

Страница: 96 / 152

- 3.16 -
SETTING THE METHOD OF MEDIUM DETECTION [MEDIA SET]
This function sets the method of medium detection.
You can select either of the following two methods of medium detection.
SELECT : Select this method when a cut sheet medium is used.
During the initial operation, the device displays a menu for
selection of “roll medium” or “cut sheet medium”.
When “roll medium” is selected, only the width of the medium is
detected. When “cut sheet medium” is selected, both the width
and length of the me dium are detected.
WIDTH : Select this method when a roll medium is used.
Only the width of a medium will be detected.
When the device power is switched on, the device detects only
the medium width automatically.
STEP
1. Select a type.
(See page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ ] and [ ] key until the display gives
the indication [MEDIA SET].
4. Push the [ENTER] key.
5. Push the [ ] and [ ] key until the display gives
the indication [SET].
6. Push the [ENTER] key.
7. Set a Method of medium detection by pushing
the JOG keys [ ] and [ ].
Here, select [WIDHT].
8. Push the [ENTER] key.
9. Push the [END] key three times, and the menu
returns to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
MEDIA SET
< ent >
TYPE.1
SET
< ent >
TYPE.1
SET
: SELECT
TYPE.1
SET
: WIDTH
<< LOCAL >>
width : 1272mm