MIMAKI JV4 Series, Руководство по эксплуатации

Страница: 88 / 152

- 3.8 -
IMPROVING THE DENSITY OF INK COLOR [INK LAYERS]
This function sprays the ink in two or more layers (wet-on-wet coating) to improve the density of
ink color.
If a coarse-surfaced medium (e.g., canvas) is used, the color of ink might be weak. In this case,
execute this function (wet-on-wet coating).
•
For nonflamable cloth, do not perform wet-on-wet coating. Wet-on-wet
coating will cause the medium to expand/contract by ink moisture producing
wavy finished surface. As a result, the ink head may rub the medium sur-
face to stain the medium or to cause paper jamming breaking the head.
STEP
1. Select a type.
(see page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Set a [INK LAYERS] by pushing the JOG keys
[ ] and [ ].
4. Push the [ENTER] key.
5. Select the number of ink layers using the [ ]
and [ ].
A number 1 to 9 can be selected as the number of times of
reprinting.
Here, select [3] times.
6. Push the [ENTER] key.
7. Push the[END] key twice, and the menu returns
to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
INK LAYERS
< ent >
TYPE.1
INK LAYERS
: 1
TYPE.1
INK LAYERS
: 3
TYPE.1
INK LAYERS
< ent >
<< LOCAL >>
width : 1272mm