MIMAKI JV4 Series, Руководство по эксплуатации

Страница: 86 / 152

- 3.6 -
EXTENDING THE RESOLUTION FOR HIGH-DENSITY PLOTTING [EXTEND]
Even when the same data is used, the plotting density may become insufficient depending on the
medium used. This function is used in such a case.
ON : Increases the resolution in the direction in which the carriage moves.
• 360
—›
720 : Extends the 360dpi data in the paper feed direc-
tion to allow plotting with 720dpi. This increases
the amount of ink and the ink density.
• 720
—›
1440 : Increases the resolution of the 720dpi data in the
direction in which the carriage moves to allow
plotting with a resolution equivalent to 1440dpi.
OFF : The resolution is not extended (increased).
Performs printing with the resolution established by command.
STEP
1. Select a type
(see page 3.4). Here, select [Type.1].
2. Push the [ENTER] key.
3. Push the [ENTER] key.
4. Set a [EXTEND] by pushing the JOG keys
[ ] and [ ].
5. Push the [ENTER] key.
6. Push the JOG keys [ ] and [ ] to select [ON]
or [OFF] of the 360dpi extended function.
Here, select [ON].
7. Push the [ENTER] key.
8. Push the JOG keys [ ] and [ ] to select [ON]
or [OFF] of the 720dpi extended function.
Here, select [ON].
9. Push the [ENTER] key.
10. Push the [END] key three times, and the menu
returns to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1 MODE
QUALITY < ent >
TYPE.1 MODE
EXTEND < ent >
TYPE.1 MODE
360
- ›
720 : ON
TYPE.1 MODE
720 - › 1440 : ON
TYPE.1 MODE
EXTEND < ent >
<< LOCAL >>
width : 1272mm