MIMAKI JV4 Series Скачать руководство пользователя страница 52

Страница: 52 / 152

- 1.34 -

BEFORE SETTING THE MEDIUM ON THE DEVICE

ADJUSTING THE HEAD HEIGHT WHEN THE MEDIUM USED IS CHANGED

[HEAD HEIGHT]

When the medium used is changed, it is necessary to adjust the head height according to the

thickness of the new medium.

If the height of the head is inappropriate to the thickness of the medium, the plotter cannot work

properly.

More important, operating the device without adjusting the head height is very dangerous: it can

damage the medium and the device.

When a new medium different in thickness from the current medium is to be used, be sure to make

proper adjustment of the head height.

•

Adjust the head height before setting the medium on the device.

If an attempt is made to adjust the head height with the medium kept set on

the platen, the medium gets caught on the carriage during “carriage out”

operation, causing damage to the head.

STEP

Put the device into the FUNCTION mode.

(See to Page.4.3)

Push the [ENTER] key.

Push theJOG keys[ ] and [ ] until the LCD

gives the indication [HEAD HEIGHT].

Push the [ENTER] key.

The carriage will come out of the capping station.

Set the new medium on the platen.

The carriage has moved to the out side of the ink station.

Adjust the head height.

1. Loosen the support screw (1), turn the height

adjustment screw (2) in the direction shown, and

move the head upward.

FUNCTION
MAINTENANCE

< ENT >

FUNCTION
LIST

< ent >

FUNCTION
HEAD HEIGHT

< ent >

HEAD HEIGHT
CARRIAGEout

: ent

(1)

(2)

Содержание JV4 Series

























































































































































Результаты поиска

Содержание JV4 Series

Отзывы:

Похожие инструкции для JV4 Series

Бренды по названию

Популярные бренды

MIMAKI JV4 Series, Руководство по эксплуатации

Результаты поиска

Содержание JV4 Series

Отзывы:

Похожие инструкции для JV4 Series

Бренды по названию

Популярные бренды