MIMAKI JV33-260BS Скачать руководство пользователя страница 62

Страница: 62 / 232

2-32

Test printing

Perform the test printing to check if printing failures (blurring or missing) due to nozzle clogging or the like occur
on the printed.

Test printing

In the local mode,
press the

key.

• Press

and

key to change the test pattern deployment direction. The deployment direction

changed here returns to the direction set in P.3-45 after test printing.

• When performing test printing after changing the deployment direction from “SCAN DIR.” to “FEED DIR.”,

the line will be fed to the position of the first test printing.

• For the detail of the deployment direction of the test printing, see P.3-45.

Press the

key.

• This machine starts printing the test pattern.

• After performing test printing, this machine returns to LOCAL mode.

Check the printed test pattern.

• Finish the operations when it is in normal.
• Execute the head cleaning when it is in abnormal. (

P.2-33)

• When a leaf media is used, set a larger media than the A4 size in longitudinal feeding.
• When a roll media is used, rewind the roll media by hands prior to printing so that it is set in the tightened

condition. The loosened may result in failures of the image quality.

Check before the

test printing

• If a media has been set.

P.2-6

• If the origin position has been set.

• If the head gap has been adjusted.

P.2-6

T ES T DRAW

( F EED D I R . )

< ENT >

* * T ES T DRAW * *

< L O C A L . 1 >

[ # 0 1 ]

w i d t h : * * * * mm

Abnormal pattern

Clogged with ink

Normal pattern

Nozzles are dirty

Downloaded From ManualsPrinter.com Manuals

Содержание JV33-260BS









































































































































































































































Результаты поиска

Содержание JV33-260BS

Отзывы:

Бренды по названию

Популярные бренды

MIMAKI JV33-260BS, Руководство по эксплуатации

Результаты поиска

Содержание JV33-260BS

Отзывы:

Бренды по названию

Популярные бренды