MIMAKI GP-604D, Руководство по эксплуатации

Страница: 9 / 134

- v -
Do not use the device in damp places.
• Avoid damp environments when
putting the device into service.
Do not splash water onto the
device.
High-humidity or water will give
rise to fire, electric shocks or
breakdown of the device.
Abnormal event occurs.
• If the device is used under an
abnormal condition where the
device produces smoke or
unpleasant smell, fire or electric
shocks can result. Be sure to
turn off the power switch
immediately and detach the plug
from the receptacle. Check first
to be sure that the device no
longer produces smoke, and
contact a distributor in your
district for repair. Never repair
your device by yourself since it is
very dangerous for you to do so.
Never Do the Following
WARNING
Do not disassemble or remodel the device.
• Never disassemble or remodel
the main unit of the printer and
the ink cartridge. Disassembling/
remodeling any of them will
result in electric shocks or
breakdown of the device.
Heater
• Keep combustibles such as dust or
stain clear out of the heater on the
table.
Power supply and voltage
• Be sure to use the device with the
power supply specifications
indicated. Set voltage selectors
according to the power voltage to
be used.
110V ••• 100-120V
220V ••• 220-240V
• To avoid fires or electrical shocks,
the two power cables must be
plugged to separate receptacles
that are grounded separately.
Handling of the power cable
• Use the supplied power cable.
• Take care not to damage, break or
work on the power cable.
If a heavy matter is placed on the
power cable, heated or drawn, the
power cable can break to cause fire
or electric shocks.