MIMAKI DS-1600, Руководство по эксплуатации

Страница: 65 / 172

- 1.47 -
Specifying the scope of printing on the fabric used
(Effective printing area)
The plotter has an area which cannot perform printing, due to mechanical reasons. This area
is called “margin.”
The effective printing area is obtained by excluding the margin from the printing fabric.
• The margin at the front and rear edges of the fabric can be reduced using a
guiding fabric.
• The margin may be changed as required.
The effective printing area can be changed by changing the margin.
For the method of setting a margin, see page 3.15.
Feeding
direction
Roll Fabric
Effective
printing
area
Default : 10 mm
Fabric Retainer
Margin
Margin
Default : 10 mm