MIMAKI DS-1600, Руководство по эксплуатации

Страница: 46 / 172

- 1.28 -
Fabric for printing
This section describes the types of fabric that can be used with the plotter and the method of
setting the media used.
Types of fablic that can be used
The types of fabric that can be used with this plotter “Roll” and “Leaf” fabric are cut sheet media.
However, because leaf fabric is handled in the same manner as roll fabric, be careful about
the setting position of leaf fabric.
Sizes of fabric that can be used
DS-1600 (AMF) DS-1800 (AMF)
Maximum 1650 mm 1900 mm
Minimum 200 mm
Printing width 1620 mm 1850 mm
Thickness 7.0 mm or less*
Roll outside diameter Ø 180 mm or less*
Roll weight 15 kg or less*
Roll inside diameter 1.5 to 3 inches*
Printing surface Regardless of faces out and in*
Taking up direction Enables of faces out and in*
Roll end treatment Light-adhesive tape is used to allow the paper to be
removed from the core with ease.
*In case of DS-1600/1800AMF.
fabric