MIMAKI DS-1600, Руководство по эксплуатации

Страница: 10 / 172

- viii -
Features
The features and methods of operation are explained in this manual for you to understand
how to use the plotter properly.
Setting for 2-way multi printing
Alternatively, using two sets of three heads in 2-way printing mode, each with different inks,
gives you the functionality of two 8-color plotters in a single unit.
2 types of textile printing ink can be used
MIMAKI genuine ink is shown below.
Sublimation dye ink : Suitable for polyester, acrylic, etc. This ink is used for direct printing.
• When using, be sure to perform the pre-treatment and post-treatment
recommended by MIMAKI for the fabric used.
Textile pigment ink : Suitable for cotton. The pre-processing is not necessary.
Applicability of fabrics up to 7mm in thickness
Even thick fabric can be used.
The plotter accepts fabric whose thickness is in the range of 0.1mm to 7.0mm.
Applicable to wide fabrics
On DS-1600, fabrics with up to 1650mm width can be set and printing for up to 1620mm width
is possible.
On DS-1800, fabrics with up to 1900mm width can be set and printing for up to 1850mm width
is possible.
Indication of the amount of remaining ink
Rough indication of ink remaining amount is shown.
Easy-to-see display
The LCD panel displays the plotter setting menu in two lines making it is easy to see.
Since the LCD panel is provided with a backlight, the display can be clearly seen even in a
dark place.
The LCD panel is capable of displaying six different languages, including English and Spanish.
Display of information for confirmation
It is possible to have the printing length displayed on the LCD panel and the printing condi-
tions to be plotted for confirmation during operation of the plotter.
High-speed interface
The "IEEE 1394" interface allows for high-speed data reception from the computer.
• Instead of using IEEE1394 interface, USB2.0 is available by connecting the “USB2.0 inter-
face Option Board (OPT-J0107)”