MIMAKI CJV30 Series, Руководство по обслуживанию, Страница: 198 / 316

© 2009 MIMAKI ENGINEERING CO.,LTD. 6.3.1 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Disassembly and Reassembly > Cut Head Carriage > Pen Assy and LED Pointer
Model CJV30/TPC Issued 2008.08.04 Revised F/W ver. 1.00 Remark
1.0
Rev.
6.3.1 Pen Assy and LED Pointer
 Work procedures
1. Remove the following covers.
• C Head cover
• CY cover F
2. Move the cutting carriage on the platen.
3. Remove the S-guide , and then the auto cutter assy .
4. Remove screws from the rear and the front of the printer to take
off the pen assy .
5. Remove the connector from PCB and also LED pointer from
the pen assy.
6. Reverse the disassembly procedure for reassembly.
Pen Assy
LED Pointer
S Guide
Auto Cutter Assy
Take care not to change the orientation of the hook of
the whirl-stop SP.
Changing the orientation will change the pen
pressure and the pen landing values.
Pen Assy
LED Pointer