MIMAKI CF3-1610, Руководство по эксплуатации

Страница: 87 / 166

2-31
2
Bas
ic Operations
Setting the Drawing Origin
The origin is the reference point for drawing, cutting, and grid
cutting. (It is normally set at the lower-right corner of the maximum
effective cutting area.)
The drawing position moves as the origin is moved.
1
Press .
Select the local menu.
• If the unit is in remote status, press to set
local status.
2
Press the jog keys to move the
light pointer to the position where you
wish to set the origin.
• Move the light pointer to the tool tip to display the current light pointer coordinates.
•
To change the head travel speed : press .
3
Press .
• The origin is set.
• The tool tip moves to the light pointer position.
• The origin is set as coordinate position (0, 0). When the
head is moved by pressing the jog keys, the screen
displays the coordinates with respect to the origin.
• The Sample Cut function cuts (draws, grid cuts) the data
next to the origin.
Data
Origin
(origin for ploting)
Max. effective
cutting area
(gray area)
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I ON - - - >
T ES T CUT - - - >
<OR I G I N> [ mm ]
3 8 2 . 6 5 6 5 . 0
SPEED F AST >