MIMAKI CF3-1610, Руководство по эксплуатации

Страница: 144 / 166

6-10
Circle
θ
Correction
Conduct the operations below to correct for displacements if the start and end points do not match when cutting
(drawing) a circle.
Setting Arc
θ
Correction
Before setting circle
θ
correction, set arc
θ
correction to Enable.
1
Display the fifth page of the local menu.
• Press several times.
2
Press and select
TOOL ADJUST.
3
Press and select
CIRCLE
θ
.
4
Press or and
select the head to set.
5
Press several times to display
the fourth page of the menu.
6
Press and select
"Enable".
7
Press .
• The setting is saved.
• Press
if you do not want to save the settings.
[ LOCA L ] 5 / 5
RESERVE - - - >
RESERVE - - - >
TOOL AD J US T - - - >
< TOOL AD J UST > 1 / 2
B CUT T ER AD J UST >
C ROL L ER AD J UST >
C I RC L E
θ
COR >
<C I RCL E
θ
> 1 / 1
B HEAD - >
C HEAD - >
<C I RCL E
θ
> 1 / 4
R< 5 + 0 . 0 K >
5 <R< 1 0 + 0 . 0 K >
T ES T PA T T ERN - >
<C I RCL E
θ
> 4 / 4
ARC
θ
D i s a b l e >
<C I RCL E
θ
> 4 / 4
ARC
θ
E n a b l e >