MIMAKI CF2 Series, Руководство по эксплуатации

Страница: 24 / 186

— 1.8 —
Head
Front face
Name Function
1 Head securing screw Used to fix the head on the Y bar. Loosen it when adjusting the height of
the head or removing the head.
2 Unit C Attach a creasing roller or cutter holder (=> A.19).
In the case of the RC head model, a cutting pressure of 1 kg to 5 kg is output.
In the case of the RT head model, a cutting pressure of 0.3 kg to 1.5 kg is output.
3 Mark sensor Used to detect the square mark. (Mark sensor equipped model only)
4 Light pointer Light up in red when matching the position for register mark detection.
(Mark sensor equipped model only)
3 Unit A A pen or swivel cutter (option => A.19) is attached to the head C.
4 Unit B Attach a reciprocal cutter holder.
RC head
SPA-0113 (cutter holder 2N)
SPA-0114 (cutter holder 07)
RT head SPA-0113 (cutter holder 2N)
SPA-0099 (cutter holder 06)
Note: No holder may be provided depending on the model
5. Mark sensor Used to detect the register mark. (Mark sensor equipped model only)
6. Light pointer Light up in red when matching the position for register mark detection.
1
2 4 3
5
6