MIMAKI CF2 Series, Руководство по эксплуатации

Страница: 163 / 186

— 6.7 —
Execution of the parameter dump
Prepare a pen and a sheet of A3 size or larger paper.
If the size of paper is smaller than A3 or smaller, the device will plot a pattern beyond the paper.
When this setting is selected, the tool will be automatically changed to a pen. Be sure to install a
pen to the head A in prior.
1
Select a pen for the tool using the tool
selecting function. (See page 2.26.)
2
Place a sheet of A3 or larger paper in
landscape orientation on the device
while aligning the lower left corner of
the paper to the origin marker label.
Be sure to align the lower left corner of
the paper to the origin marker label ad-
hered to the lower left of the cutting
panel.
3
Invoke the 3rd page of the LOCAL
menu on the screen.
4
Select the [SELF TEST].
5
Invoke the fifth page of the self-test
screen on the LCD.
6
Select the [PARAMETER DUMP].
[ LOCAL ] 1 / 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
[ LOCAL ] 3 / 4
INTERFACE ———>
MODE SET ———>
SELF TEST ———>
< SELF SET > 1 / 5
PATTN CUT 1 ———>
PATTN CUT 2 ———>
DATA DUMP ———>
< SELF SET > 5 / 5
PARAMTR DUMP ———>
PAGE
+
F3
+
F1
+
F3
+
Origin marker label