MIMAKI CF-0907, Инструкция по эксплуатации

Страница: 114 / 170

How to adjust the tools
“TOOL SELECT” consists of two categories; i.e., the “adjustment of the cutter”, the “adjustment of
the roller” and "circle θ adjust".
The tool adjusting procedure is described below taking the “adjustment of the cutter 1” as an ex-
ample.
1
Attach a pen and a tangential cutter
to the head.
See pages 2.18 and 2.19.
2
Press the
PAGE
+
key several times
until the LCD indicates page 4 of the
LOCAL MENU.
3
Select the [TOOL ADJSUT].
4
Select the [CUTTER ADJUST].
The menu changes to the eccentricity
adjustment menu.
The illustration on the left is for when a
roller is set to unit B, when a tangential
cutter is set to the unit C.
5
To check for the eccentricity of the
cutter, select the [TEST PATTERN]
to cut patterns A and B.
[ LOCAL ] 1 / 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
[ LOCAL ] 4 / 4
CUT AREA ———>
AXIS ALIGN ———>
TOOL ADJUST ———>
< TOOL ADJUST > 1 / 1
B CUTTER ADJUST ——>
C ROLLER ADJUST ——>
CIRCLE
θ CORP ———>
< ADJ > SWIEVEL 1 / 3
A (LNG) ∗∗ . ∗∗ >
B ∗∗ . ∗∗ >
TEST PATTERN ———>
PAGE
+
F3
+
F1
+
F3
+
Normal pattern A Normal pattern B
: Cutter