MIMAKI AMF-250, Руководство по эксплуатации

Страница: 36 / 42

- A.2 -
Remove the Auto Media Feeder
When moving the plotter to install or when the Auto Media Feeder must be removed from the
plotter, replace following the procedure described below.
• The operatiob work to remove the Auto Media Feeder from the plotter
should be carried out by at least parsons.
• Make sureto turn to power off of the plotter and execute the operation work.
STEPS:
1. Presses the power switch located at the front
of the plotter and turns the power off.
2. Remove the media from the plotter and roll
them back to the Auto Media Feeder.
Media