MIMAKI AMF-250, Руководство по эксплуатации

Страница: 28 / 42

- 2.14 -
When drawing from the edge of the media feeding forward to the plotter
You need to operate the panel of the plotter and the Auto Media Feeder.
• Operation on the plotter side.
Feedback the media of the plotter at the edge of the media back to the border of drawing and
then press ENTER key to set the origin of the media.
• Operation on the Auto Media Feeder.
As feeding cause the media loosened, take up the media by the switch-Changeover/Action.
The final set position (refer to step 12) is located approximately 10mm up from the foot.