Milvus Robotics SEIT 500, Руководство пользователя

Страница: 40 / 62

40 | P a g e
Version 2.3 (05/2021) EN
User Manual for SEIT 500
•
Leveling MR AutoC – 500;
“ Charging pads ” (See page 14) of SEIT 500 and MR AutoC – 500 ’s “ ±24 VDC charger pins ” (See
page 36) are not at the same level, initially. To level them, following steps must be done,
accordingly.
Figure 5.16: Leveling the docking station
1 Socket Head Cap Screws 3 Floor Plate
2 Socket Set Screws
➢
Slightly loosen the socket head cap screws (1),
➢
By rotating socket set screws (2) in CW and CCW direction, height of the MR AutoC –
500 is adjusted.
➢
When the middle of SEIT 500 ’s “ charging pads ” (See page 14) and MR AutoC – 500 ’s
“ ±24 VDC charger pins ” (See page 36) are at the same level, secure the level by fastening
up socket head cap screws (1).