3 |
P a g e
Version 2.3 (05/2021) EN
User Manual for SEIT 500
1.
Introduction
This manual contains important notes and information about the various operating phases of the SEIT
500:
•
Transport, initial startup
•
Safe operation, removal of any faults, troubleshooting
•
Spare parts and applications
In addition to this manual, special contractual agreements and technical documents apply to special
versions of SEIT 500 and its additional equipment.
o
To ensure trouble-free and safe operation as well as the settlement of possible warranty claims,
always read manual first and observe all the information contained herein.
o
Keep the installation and operating instructions close to SEIT 500.
o
Pass the manual on to any subsequent operator or occupant. Milvus Robotics does not accept
any liability for faults or defects due to non-observance of this manual.
If you have any questions after reading the manual, please contact Milvus Robotics.
1.1.
Warning Notices in This Document
The warning notices refer to risks which may arise while using SEIT 500. They are available in four
danger level identified by the signal word:
Table 1.1: Signal words and their meaning
Signal Word
Meaning
DANGER
Identifies a danger with high risk that can lead to death or serious injury if it is
not avoided.
WARNING
Identifies a danger with medium risk that can lead to death or serious injury if
it is not avoided.
CAUTION
Identifies a danger with low risk that can lead to minor or medium injury if it is
not avoided.
NOTICE
Identifies a danger that can lead to property damages.
