Milnor 72044SR2 Скачать руководство пользователя страница 15

Страница: 15 / 175

Pellerin Milnor Corporation

Careless Use Hazards

BNWVUS04.C05 0000235127 A.4 A.2 A.3 12/11/20 8:32 AM Released

Careless Operation Hazards—Vital Information for Operator Personnel (see also
operator hazards throughout manual)

BNWVUS04.C06 0000235126 A.4 A.2 12/11/20 8:32 AM Released

WARNING:

Multiple Hazards —

Careless operator actions can kill or injure person-

nel, damage or destroy the machine, damage property, and/or void the

warranty.

�

Do not tamper with or disable any safety device or operate the machine with a mal-

functioning safety device. Request authorized service.

�

Do not operate a damaged or malfunctioning machine. Request authorized service.

�

Do not attempt unauthorized servicing, repairs, or modification.

�

Do not use the machine in any manner contrary to the factory instructions.

�

Use the machine only for its customary and intended purpose.

�

Understand the consequences of operating manually.

Careless Servicing Hazards—Vital Information for Service Personnel (see also
service hazards throughout manuals)

BNWVUS04.C07 0000235125 A.4 A.2 12/11/20 8:32 AM Released

WARNING:

Electrocution and Electrical Burn Hazards —

Contact with electric

power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.

�

Do not service the machine unless qualified and authorized. You must

clearly understand the hazards and how to avoid them.

�

Abide by the current OSHA lockout/tagout standard when lockout/tag-

out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.

WARNING:

Entangle and Crush Hazards —

Contact with moving components nor-

mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.

�

Do not service the machine unless qualified and authorized. You must

clearly understand the hazards and how to avoid them.

�

Abide by the current OSHA lockout/tagout standard when lockout/tag-

out is called for in the service instructions. Outside the USA, abide by the OSHA standard
in the absence of any other overriding standard.

WARNING:

Confined Space Hazards —

Confinement in the cylinder can kill or injure

you. Hazards include but are not limited to panic, burns, poisoning, suffo-
cation, heat prostration, biological contamination, electrocution, and
crushing.

�

Do not enter the cylinder until it has been thoroughly purged, flushed,

drained, cooled, and immobilized.

General Service & Safety-Related Components

Содержание 72044SR2
















































































































































































Результаты поиска

Содержание 72044SR2

Отзывы:

Milnor 72044SR2, Механические детали и сервисное обслуживание, Страница: 15 / 175

Результаты поиска

Содержание 72044SR2

Отзывы: