Milltronics IQ Radar 160, Инструкция по эксплуатации, Страница: 51 / 81

PL-550 IQ Radar 160/160 Ex Page 51
Operation
This mounting arrangement can also be used to provide optimum signal
conditions on foaming materials.
Suitable pipe diameters are 50 mm (2”) to 250 mm (10”).
Note: The measurement range is reduced to 13 m (43’) for a 50 mm (2”)
still pipe or 14.5 m (47’) for an 80 mm (3”) still pipe.
Reset:
P999 master reset
Program:
P001 enter ‘1’ mode of measurement = level
P002 enter ‘1’ material = liquid
P003 enter ‘2’ measurement response = 1m/min.
P004 enter ‘240’ antenna
= dielectric rod,
standard length
P005 enter ‘1’ units = metres
P006 enter ‘5’ empty distance = 9.6 m
P007 enter ‘4.5’ span = 8.5 m
P655 enter ‘0.955 propagation factor = 100 mm (4”) pipe
P820 enter ‘6’ algorithm = first echo
P830 enter ‘4’ TVT type = factory
Run:
Press run to start normal operation. Press .
Pipe P655 Value
50 mm (2”) 0.827
80 mm (3”) 0.915
100 mm (4”) 0.955
150 mm (6”) 0.980
200 mm (8”) 0.990
Note: See the P655 table on page 58 for other pipe diameters.