Milltronics EnviroRanger ERS500, Руководство по установке, Страница: 22 / 41

Page 22 EnviroRanger Installation Guide PL-601
In
s
ta
lla
tio
n
Installing Optional Cards in Wall mount Units
SmartLinx Module
1. Align card with the 2 mounting posts, and press-fit with the female connector.
2. Use the screws supplied with the card to attach it to the mounting posts.
3. Wire the SmartLinx card in according to SmartLinx Manual.
Analog Input /Output Cards
1. Align the I/O card with the 36 pin male connector and the four standoffs.
2. Use the screws supplied with the card to attach it to the mounting posts.
3. Wire the I/O Card as shown in the Optional Card Wiring table on page 29.
Expansion Memory
1. Align the optional Expansion Memory to the male connector.
2. Push-fit the Expansion Memory Card into place.
mounting posts
female connector
and
(used to install an
optional SmartLinx
card)
battery
male connector
(used to install
expansion memory
card )
male connector
(used to install
option I/O cards)
F1, F2
(see specifications)
power supply
terminal board