Milltronics airanger XPL plus Скачать руководство пользователя страница 51

Страница: 51 / 114

7ML19981AN02

AiRanger XPL Plus – INSTRUCTION MANUAL

Page 47

mmm

Enhancement P

met

Installation Records (P340 to P342)

Use these features to view data relating to this specific XPL Plus installation.

P335 (G) AUTO RECORD B SETPOINT

Enter the critical level which, in conjunction with Auto Record A Setpoint,
defines the boundaries for Auto Profile Records to be saved.

values: -999 to 9999

P336 (G) AUTO RECORD FILLING / EMPTYING

Use this feature to restrict Auto Profile Records from being saved unless the
level is rising, falling or either.

If the level changes at a rate in excess of the corresponding Filling / Emptying
Indicator (P702 / P703) values, the Echo Profile is saved subject to this and other
Auto Profile Record restrictions.

values: 0 = Auto Profile Record on filling or emptying (preset)

1 = Auto Profile Record on filling only.
2 = Auto Profile Record on emptying only.

P337 (G) AUTO RECORD LOE TIME

Use this feature to restrict Auto Profile Records from being saved unless an
extended loss of echo (LOE) condition occurs.

If the LOE condition exceeds the period entered (in seconds) the Echo Profile is
saved, subject to this and other restrictions.

When set for "0" (preset), LOE is not required for an Auto Profile Record to be
saved.

values: 0.0 to 9999

P340 (V) DATE OF MANUFACTURE

View the date of manufacture of this XPL Plus.

values: YY:MM:DD format

Содержание airanger XPL plus



















































































































Результаты поиска

Содержание airanger XPL plus

Отзывы:

Milltronics airanger XPL plus, Инструкция по эксплуатации, Страница: 51 / 114

Результаты поиска

Содержание airanger XPL plus

Отзывы: