Milltronics airanger XPL plus, Инструкция по эксплуатации, Страница: 21 / 114

7ML19981AN02 AiRanger XPL Plus – INSTRUCTION MANUAL Page 17
mmm
mm
P
rogr
a
mming
Program Mode Entry
Upon initial power application, the XPL Plus displays "OFF". To enter the PROGRAM mode:
1. Ensure the enclosure lid is secured by the six captivated screws.
2. Place the infrared programmer in the enclosure lid recess (no wiring or
fastening required).
3. Press .
When the PROGRAM mode is entered after RUN mode operation, all operating data is
retained in memory. Relay status and mA output values are held at last known values
(unless affected by a parameter alteration or
is pressed) until the RUN mode is re-
entered. The RUN mode is automatically re-entered if the XPL Plus is left unattended in
the PROGRAM mode for an extended period.
Parameter Value Alteration
In the PROGRAM mode:
1. Press as required to underline the Parameter Number display field and
a) key in the desired Parameter Number, (direct access) or
b) press or as required (scroll access).
(As preset, Quick Start Parameters and any previously altered parameter may be scroll
accessed.)
2. Press as required to underline the Point Number display field and
a) key in the desired Point Number, (direct access) or
b) press or as required, (scroll access).
To alter the Parameter Value for all Point Numbers at once, direct access
Point Number 00.
3. With the desired Parameter Number and Point Number displayed, key in the desired
Parameter Value and press
If Parameter Value alteration is not permitted, access the Lock parameter (P000)
and enter the security code (See Programming Security).