Miller FILTAIR MWX-S, Руководство пользователя

Страница: 19 / 36

OM-239026 Page 15
5-3. Tipping
! Do not move or operate unit
where it could tip.
! Do not move unit with extrac-
tion arm extended or unit
may tip.
! Do not move unit by pulling
on extraction arm or equip-
ment may tip. Use handle on
fume extractor to move unit
! Do not use this equipment to
support personnel, large
tools, or other material.
5-4. Installing Extraction Arm
805268
See extraction arm owner’s manu-
al for installation and service in-
formation.
5-5. Connecting To Compressed Air Supply
! Shut off air supply before
disconnecting or connecting
air hose.
! Wear protective equipment
when disconnecting com-
pressed air supply. Internal
air tank is under pressure
and will discharge when air
supply is disconnected.
! Close cover before starting
unit or operating filter clean-
ing system.
! Do not direct air stream to-
ward self or others.
! If ANY air is injected into the
skin or body seek medical
help immediately.
1 3/8 NPT Compressed Air
Fitting
2 Compressed Air Supply
(80 − 100 psi/552 − 689 kPa)
3 Air Hose
Install customer-supplied com-
pressed air fitting in 3/8 NPT fitting
on front of unit.
Connect customer-supplied air
hose to fitting when filter replace-
ment gauge indicates cleaning is
required.
245611
Tools Needed:
2
3
1