Miller FieldPro Smart Feeder CE, Руководство пользователя

Страница: 17 / 56

OM-264234 Page 11
SECTION 4 − SPECIFICATIONS
4-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located inside the cover. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Unit Specifications
Type of
Input
Power
Welding
Power Source
Type
Wire Feed
Speed
Range
Wire
Diameter
Range
Rated Welding
Output
Max. Wire
Spool
Capacity
Overall
Dimensions
Weight
Open-Circuit/
Arc Voltage,
14 − 100
Volts DC
PipeWorx 350
FieldPro*
Big Blue (SF
Models Only)
50 − 500 ipm
(1.27 − 12.7
mpm)
Depending On
Arc Voltage
.035 − .045 in.
(0.9 − 1.1 mm)
MIG −
275 A at 27 VDC,
60% Duty Cycle
Pulse −
275 A at 20 VDC,
35% Duty Cycle
33 lb (15.0 kg)
12 in. (304 mm)
Length: 21 1/2. in.
(546 mm)
Width: 18 in.
(457 mm)
Height: 13 in. (330
mm)
50 lb
(23 kg)
* Welding with Smart Feeder requires the PipeWorx 350 to be connected to 3-phase power.
4-3. Gun Recommendation Table
Process Gun
RMD
PipeWorx 300-15 or 250-15
Pulsed MIG PipeWorx 300-15
Notes