OM-256476 Page 9
1
Variable Shade
Adjustment Buttons
2
Mode Control Button
Use the LTR and DKR ad-
justment buttons to adjust
the lens shade in the dark-
ened state. Use the table in
Section 1-4 to select proper
shade control setting based
on your welding process.
The shade ranges for each
mode are as follows:
Weld
−
No. 8–No. 13
Cut
−
No. 5–No. 8
Grind
−
No. 3 only
X-Mode
−
No. 8–No. 13
Start at the highest setting
and adjust lighter to suit the
application and your person-
al preference.
Variable Shade Adjust-
ment Procedure
Press Auto On/Off but-
ton to turn lens On.
Press Mode Control
Button to select desired
function: Weld, Cut,
Grind, or X-Mode.
X-Mode is not present on
Performance helmets.
Use LTR and DKR ad-
justment buttons to
select desired shade.
Begin welding or contin-
ue with other lens
adjustments.
2
Digital Elite Lens Shown
1
4-4. Variable Shade Control