Miller Auto-Axcess 300 DI, Руководство пользователя

Страница: 31 / 60

OM-228 874 Page 27
5-1 . Operational Terms (Continued)
Time Indicates time values being set for timed functions (e.g. Preflow, Postflow which are only available in the Arc On
and Analog input or the Arc On and No Analog input modes).
Volts Preset voltage in MIG mode at idle, actual voltage while welding, and 3 seconds hold value at end of weld.
Weld Sequence function that allows for a timed weld operation [(0 to 999 seconds) only available on Auto Axcess
models in the Arc On and Analog input or the Arc On and No Analog input modes, and can only be set with the
optional PDA with File Management software].
WFS Term used to represent wire feed speed. In MIG mode, wire feed setting is independent of voltage setting. In
pulse, Accu-pulse, and RMD (optional) adjusting wire feed speed also increases power level on wire electrode
(one knob control).
Wire Type Selection of wire type by alloys and classification.
Table 4-1. Welding Wire And Gas Abbreviations*
Wire Description Wire Abbreviation Alloy Type Gas Type Gas Abbreviation
Steel STL E70, E100, E120 100% CO
2
,
90% Argon/10% CO
2
,
85% Argon/15% CO
2
,
75% Argon/25% CO
2
,
95% Argon/5% CO
2
,
95% Argon /5% O
2
,
98% Argon/2% O
2
CO2
C10
C15
C25
C5
OX5
OX2
Stainless Steel SS 308, 309, 312, 316 98% Argon, 2% O
2
(81Ar/18HE/1CO
2
Accu-pulse)
90HE/7-1/2Ar/2-1/2CO
2
MIG/RMD/Accu-pulse)
OX2
Tri Gas
Tri Gas
Cored Tubular Wire MCOR 71, 76, 86R, 409, 439 90% Argon/10% CO
2
C10
98% Argon/2% O
2
OX2
Aluminum ALUM 4XXX, 5XXX 100% Argon ARGN
* Not all wire types may be available with your unit.
Notes