6
Figure 12 (X-Trainer)
13.
Install ¾” x 1/16” strips on trailing edge top and
bottom (Fig. 13).
14.
Install planking using leftover material from
provided 1/16” balsa. (Fig. 12)
Figure 13
15.
Cut excess leading and trailing edges and spar
material flush with end ribs. Carve and sand leading
edge to rounded shape. (Fig 14)
Figure 14
Figure 15
16.
Remove parts W5- W5-A and assemble as shown in
(Figure 16a) and sand break-aways until smooth.
Install wing tips W5, along with braces W9 and
W10. (Fig. 16b)
Figure 16a
Figure 16b
17.
Remove parts P5 from plywood sheet, and sand
break-aways smooth. Flip wing over and carve
away excess material from bottom of the leading
edge between center ribs. Install Part P5 front wing
saddle.. (Fig. 17)
18.
Remove Parts P3, P4, P6 and P8 and assemble rear
wing saddle. (Fig. 18) Create a ½” notch in the
bottom spars for the Slow Stick fuselage to fit.
(Also Fig. 18) Main wing assembly is now
complete! You may now sand as desired and cover
with light covering of choice. When covering, be
sure to leave the bottom area between center ribs
open. Use P4-T and P3-T for X-Trainer option.