Designed & Manufactured in the UK by
Millbank Electronics
Millbank Electronics Quality System is Registered by Lloyds
Millbank Electronics operate a Quality Management
System which meets the requirements of
BS EN ISO 9001 : 2000
Product Compliance to EC directives for Standard Products
All standard products conform to the relevant directives,
regulations and standards for electronic and associated apparatus.
The equipment is CE marked both on the apparatus and the packaging.
The Modular range of products for use in Mainframes must be used
in the configuration as described in the product literature.
Failure to use the modular products in the manner described
will invalidate the EC Compliance.
Our products meet the appropriate British and International standards. A product “Declaration of Conformity” Statement is
available for each of the product ranges (available on request). This covers both the EMC and Low Voltage Directives.
UNPACKING
While all Millbank equipment is carefully packed to prevent damage in transit, we recommend that the
equipment is unpacked and inspected immediately on receipt. If damage has occurred
please advise your carrier and your supplier who will arrange appropriate action.
If it is necessary to re-pack the equipment for onward shipping or returning to Millbank for service
PLEASE ENSURE THAT THE ORIGINAL PACKING OR EQUIVALENT IS USED.
KEEP THIS INFORMATION IN A SAFE PLACE
Equipment Serial No...........................................................
Supplied by.........................................................................
............................................................................................
Date.....................................................................................
Publication Code DPM_TIG Issue 1
Page 2 of 6
