4x4 HDMI 2.0 Matrix with Audio Matrix/ Downscaling/ AOC Supported
26
Command
Function
Feedback Example
[xx] =00~04,
xx=01~04 is the number of output port,
if the xx =00, it means all output ports.
OUT 02 HDCP
PASSIVE!
OUT 03 HDCP
PASSIVE!
OUT 04 HDCP
PASSIVE!
HDCP[xx]BYP.
Output HDCP follows input HDCP.
Input has HDCP, output is HDCP1.4.
Input
doesn’t have HDCP, output is
without HDCP.
[xx]=00~04,
xx=01~04 is the number of output port,
if the xx =00, it means all output ports.
OUT 01 HDCP
BYPASSS!
OUT 02 HDCP
BYPASSS!
OUT 03 HDCP
BYPASSS!
OUT 04 HDCP
BYPASSS!
8.3.7
EDID Management
Command
Function
Feedback Example
EDIDMInit.
Restore the factory default EDID data
for each input.
All Input EDID Set
Default!
EDIDUpgrade[xx]
.
Upgrade EDID via Serial Port
⚫
[xx]=00~04
xx=01~04 is the number of input
port(able EDID user-defined for
corresponding HDMI input), if the
xx=00, it means all input ports(able
EDID user-defined for all HDMI
inputs).
Note: EDID user-defined can be used
once, if switch to another EDID or exit,
it will not be saved.
⚫
[xx]=U.
xx=U means user-defined for built-in
EDID(It can be saved in machine for
using at any time).
Note: It can user-defined only one
built-in EDID, after finishing it,
Input XX/User
Define EDID
Upgrade OK By
RS232 Or GUI!
