Milestone HistoDream EW, Руководство оператора, Страница: 33 / 64

HistoDream EW MM164-001-Operator Manual
33
2.12.6. Programming holidays
HistoDream EW can be programmed in such a way that it does not automatically start on certain dates even
if scheduled to start up by the automatic setting. This option is ideal for saving energy when the unit is not in
use (e.g. on holidays or during company closures).
On the operating screen, press the STBY SET key , and the following screen opens:
SET STANDBY ON 00 00
(DD-MM)
Use the UP, DOWN and ENTER keys to set the day and month (or the
month and day if the American format was selected) in which the unit must
not start automatically, i.e. the pause start time.
Press ENTER for each value to confirm the settings.
Use the UP, DOWN and ENTER keys to set the pause end time, i.e. the
day and month after which the unit activates again with the programmed
operating times.
If the unit is not intended to have any scheduled pause, enter 00-00 as START TIME and END TIME values.
The default pause values are:
SET STANDBY ON: 00-00
SET STANDBY OFF: 00-00
These values mean that no pause has been programmed.