eGROSS pro-x - eGROSS
MM137-004 - Operator Manual
72
5. OPTIONAL PARTS
It is prohibited to use parts that are not supplied by Milestone.
5.1. Ventilated waste paper bin with trolley (CODE 102593)
An optional part for collecting waste materials (e.g. paper soiled with fixative). The bin is connected to the unit's
Ventilation system. The assembly instructions are provided below.
The system comes complete with a bin transport trolley, aspiration pipe and a ventilation attachment.
Remove the rear panel by unscrewing it with a no. 8 spanner or socket wrench.
Fasten the ventilation attachment using a no. 8 spanner or socket wrench.
Afterwards, connect the ventilation pipe and secure it using the supplied strap.
Connect the other end of the aspiration pipe to the bin and secure it with the supplied strap.
Remove the cover every time the waste material is thrown out, then close the cover again.
The alipak container shown in the figure is not supplied. The bin has been specifically sized to contain a
standard 60L alipak container.
The bin can be installed on either left or right side of the unit.
Dimensions: WxDxH 350x570x850 mm (13.8x22.4x33.5 in).
The rear panel serves only the connection of the vented bin's system.
