4K 4x1 Seamless Switcher with Multi-view
28
8.2.2 Signal Switching
Command
Description
Command & Feedback
Example
#SET_AV
Switch an input AV signal to one
or more outputs
#SET_AV INPARAM TO
OUTPARAM
INPARAM = 1 ~ 4
1 - HDMI 1
2 - HDMI 2
3 - HDMI 3
4 - HDMI 4
OUTPARAM = A ~ D(NO THIS
PARAMETER TO SET TO A)
#SET_AV 3
#SET_AV 1 TO A
@AV 3 TO A
@AV 1 TO A
#GET_AV
Get the current AV switching
status of input or output channel
#GET_AV PARAM1
NO PARAMETER = GET ALL
WINDOWS SELECTED INPUT
STATUS
PARAM1 = A ~ D
#GET_AV
#GET_AV A
@VIDEO
OUT A B C D
IN 1 2 3 4
@AUDIO_SRC 1
@VIDEO 1 TO A
#SET_AUTO_SWITCH
Enable/disable auto switching
mode
#SET_AUTO_SWITCH PARAM
PARAM = 0 ~ 1
0 - DISABLED
1 - ENABLED
#SET_AUTO_SWITCH 1
@AUTO_SWITCH 1
#GET_AUTO_SWITCH
Get the auto switching status
#GET_AUTO_SWITCH
@AUTO_SWITCH 1
