Milesight UC50 Series, Руководство пользователя

Страница: 17 / 28

17
4.3.2 RS232 Settings
1. Connect RS232 device to RS232 port on interface 1. If you need UC50x to power this device,
please connect the power cable to power output on interface 1.
2. Go to “
General -> Serial ” of ToolBox software or “ Setting->Serial Setting ” to enable RS232
and configure serial port settings. Serial port settings should the same as RS232 terminal
devices.
Parameters Description
Interface 1(Pin 1)
5V/9V/12V Output
Enable 5V/9V/12V power output of interface 1 to supply power to RS232
terminal devices
continuously . Only UC501 supports this feature.