Milesight UC50 Series, Руководство пользователя

Страница: 14 / 28

14
The device returns
to the power supply
state
If the device loses power and return to power supply, the device will be
on or off according to this parameter.
Change Password
Change the password for ToolBox APP or software to read/write this
device.
4.3.1 RS485 Settings
1. Connect RS485 device to RS485 port on interface 1. If you need UC50x to power this device,
please connect the power cable to 5V/9V/12V or 3.3V power output on interface 1.
2. Go to “
General -> Serial ” of ToolBox software or “ Setting->Serial Setting ” to enable RS485
and configure serial port settings. Serial port settings should the same as RS485 terminal
devices.
Parameters Description
Interface 1(Pin 1)
5V/9V/12V Output
Enable 5V/9V/12V power output of interface 1 to supply power to RS485
terminal devices. It’s 12V by default and you can change
DIP switches to
change voltage.