MiLECTRIC ECM-3F, Инструкция по эксплуатации

Страница: 14 / 65

14
b) If you want to change the time after the timer is set, you have to start from step 1.
Setting the timer to turn more than one cooking zones off
a). If more than one heating zones use this function, the timer indicator will show the lowest time.
(e.g. zone 1# setting time of 5 minutes, zone 2# setting time of 15 minutes, the timer indicator shows
“5”.)
NOTE: The red dot next to power level indicator will flash
。
(set to 5 minutes) (set to 15 minutes)
b). Once the countdown timer expires, the corresponding zone will switch off. Then it will show the new
min. timer and the dot of corresponding zone will flash.
zone 1# zone 2#
c). When cooking timer expires, the corresponding cooking zone will be switch off automatically.
Note:
1) The red dot next to power level indicator will illuminate indicating that zone is selected.
2) If you want to change the time after the timer is set, you have to start from step 1.
3.3.6 Over - Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.