Raven Converter Chassis
Figure 3-12.
Installing Modular Converters into Chassis Slot
Hardware Installation
The Raven Converter Chassis is suitable for use in an office environment where it can be
rack-mounted in standard EIA 19-inch racks or standalone.
Desktop Application
1. Set the Raven Converter Chassis on a sufficiently large flat space with a power outlet
nearby.
2. Apply the rubber footpads to each corner on the bottom of the Chassis. These pads
cushion the switch against shock/vibration.
3. Connect the power cord. The power supply is self-adjusting for AC input power between
110 and 220 Volts.
Note: Air vents must not be blocked and must have free access to the room ambient air for
cooling.
Rack Mounting
To stack Raven Converter Chassis in a standard 19-inch EIA rack, use the supplied mounting
kit. This kit contains 2 side-mounting brackets, 10 bracket screws, and 4 larger rack-mount
screws.
Perform the following steps to rack mount the Chassis:
P/N 90000413 Rev A
