MIKSTER
MIKSTER
Operation description
Operation description
8
9
TRYB EDIT - zmiana wartoœci zadanych
To get into the setpoint edit mode press the EDIT key.
When the edit mode is activated, the EDIT key flashes.
You can change parameters on the display by using the keyboard
To confirm or move to the next field, press
to exit press
Setpoint sequence::
START mode duration (hours : minutes)
controller temperature setpoint based on chanel 1
controller temperature setpoint based on chanel 2
EDIT
+
-
EDIT
NOTE:
Channel 3 temperature setpoint can be entered in the SETUP menu (item 38).
INFO MODE
Press the
key to recall information depending on the current controller operating mode:
For the AUTOSTART mode:
According to the setting in the Setup menu, item SF47:
For HMD – hour, minute and daily delay when the START mode is to be activated
For HM – hours and minutes to the START mode
+
-
Other information is identical for each mode:
channel 3 measurement (Ad-3); Measurement on Channel 2 – when the pasterisation number is being
counted
channel 1 and channel 2 temperature setpoints
current date
current time
To get the next (previous) information, press
Press the
key to edit parameters for this mode.
The AUTOSTART mode can be activated in two ways:
1.At specified time (hour and minute) and daily delay, if any (F47 SETUP - HMD).
2.After counting down a specified time (hours and minutes)
(F47 SETUP - HM)
Pressing START button during edit mode couses begining of waiting mode for START (AUTOSTART).
To quit the AUTOSTART mode, press the
key once again.
You can switch immediately from the AUTOSTART mode into the START mode by pressing the START
key.
To start and end the START mode, press
For typical controller settings after switching into the START mode all regulators are activated and the
process time counting down is started.
The time in hours and minutes to the process end is shown on the display.
START MODE
START/STOP
R
R
OK!
AUTO/START
AUTO/START
AUTO/START
AUTO/START
AUTO/START
AUTO/START
EDIT
INFO
INFO
Indu-50 version: 1.4
Indu-50 version: 1.4
AUTOSTART MODE