Mikrotron EoSens 3CL, Руководство пользователя

Страница: 19 / 40

First steps
4.1 Connecting power and I/O signals
The power connector of DC power supply has to be connected to the 6-pin
Hirose plug (HR10A-7P-6S).
1
2
3 4
5
6
Fig.: 4-1: Power connector pinning
NOTE If it is connected with another 12 - 24 V/2A power supply, take the pinning
of the connector into account.
Pin Signal Pin Signal
1 VCC 2 VCC
3 STRB
OUT
4 GND
STRB
5 GND 6 GND
INFO Before applying power, verify the polarity of the leads (+/-) and whether the applied
voltage is correct.
Pin 3 of the 6-pin connector provides a strobe signal (STRB
OUT
) which is high
during exposure.
Internally, the STRB signal of pin 3 (STRB
OUT
) is connected with an optocoupler.
MIKROTRON GmbH / 3CL / CAMMC301x-UG / 2020 19 - 40