Mikrotron EoSens 25CXP Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 70

Mikrotron EoSens 25CXP Скачать руководство пользователя страница 6

Remarks, Notes and Warnings

4CXP Camera

page 6 of 70

MIKROTRON GmbH

About This Reference Guide

This reference guide contains helpful information to install and operate 4CXP cameras of the type
MC4082/MC4083 and MC4086/ MC4087. It has been produced with care. Nevertheless, information
might be erroneous or incomplete. MIKROTRON cannot be held responsible for any problems
resulting from incomplete or erroneous information.

In case you detect errors or need further information, please inform us via mail:

[email protected]

or call +49 89 7263420.

We highly recommend, reading this reference guide carefully.

This reference guide is subject to change without notice.

Remarks, Notes and Warnings

This reference guide contains remarks, notes and warnings that are helpful and often important in
order to avoid data loss or camera damage. They are emphasized as follows:

Remark

Hints and other helpful information

Note

Hints concerning frame quality, timeouts, or other

WARNING

Important information concerning data loss or camera
damage

Registered Trademarks

In this reference guide the following products are registered trademarks:



CoaXPress®



EoSens®



GenICam®

In the following, these product names are not specially marked as registered trademarks.
Nevertheless, these product names have not to be used in other context without the trade mark
sign!

«
...
4
5
6
7
8
...
»

Содержание EoSens 25CXP







































































Отзывы:

Нет отзывов