Custom Features
4CXP Camera
MIKROTRON GmbH
page 57 of 70
FixedPatternNoiseReduction
This feature switches the fixed pattern noise reduction feature ON or OFF.
Access
read/write
Type:
enumeration
In:
Out:
-
Remark:
values ON or OFF
CustomSensorClkEnable
This feature enables/disables the custom defined sensor clock.
Access
Read / Write
Type:
Boolean
In:
Value
Description
ON
The camera uses the sensor clock defined with feature '
CustomSensorClk
'.
OFF
The camera uses the default sensor clock defined for the current CoaXPress link
settings.
Out:
1 = ON; 0 = OFF
Remark:
The 4CXP camera defines a default sensor clock for each CoaXPress link speed to run
the camera in an optimal frame rate / image quality relation.
With the custom sensor clock feature this default value can be overwritten by a
customer selected value (see feature '
CustomSensorClk
' below). Overwriting the
default sensor clock by a higher sensor clock may result in substantial higher frame
rates (depending on the frame size) but may also downgrade the image quality. It is up
to the user to find a setting that fits his needs.
This feature may be mainly of use for frame grabber boards with a max. link speed less
than CXP6.
CustomSensorClk
This feature defines the sensor clock to be used if CustomSensorClkEnable = true.
Access
Read/Write
Type:
Enumeration
In:
Enumeration
Description
Clk_50MHz
Set camera sensor clock to 50 MHz
Clk_75MHz
Set camera sensor clock to 75 MHz (default for CXP1-CXP3)
Clk_100MHz
Set camera sensor clock to 100 MHz
Clk_125MHz
Set camera sensor clock to 125 MHz (default for CXP5)
Clk_150MHz
Set camera sensor clock to 150 MHz (default for CXP6)
Out:
Currently selected sensor clock.
Remark:
CustomSensorClkEnable