RouterBOARD 711 Series User's Manual
Specifications
RouterBOARD 711
CPU
MIPS24k based, Atheros AR7240 400MHz CPU
Memory
32MB SDRAM onboard memory (64MB on RB711A)
Boot loader
RouterBOOT
Data storage
64MB onboard NAND memory chip
Ethernet
One
10/100 Mbit/s Fast Ethernet port supporting Auto-MDI/X
Wireless
One built-in wireless card AR9280 802.11a/n wireless device
MiniPCI slot
none
Serial port
none
LEDs
Power and User LED, 5 status LEDs
Speaker
Mini PC-Speaker
Power options
Power over Ethernet: 10..28V DC (except power over datalines)
Power jack: 10..28V DC (RB711A only)
Dimensions
105mm x 105mm
Weight
82 g (2.9 oz)
Temperature
Operational: -20°C to +65°C (-4°F to 149°F)
Humidity
Operational: up to 70% relative humidity (non-condensing)
Power consumption
280mA (345mA max) at 12V
RouterOS license
Level3 (Level4 on RB711A)
Hardware Guide
Memory and Storage Devices
Onboard Memory
The board is equipped with 64 MB DDR onboard memory.
Onboard NAND Storage Device
The boards are equipped with one 64MB NAND nonvolatile memory chip.
Extension Slots
MiniPCI Slots
None
Input/Output Ports
LAN1 Port with PoE
It is compatible with passive (non-standard) Power over Ethernet. The board accepts voltage input from 10
to 28 V DC. It is suggested to use higher voltages for power over long cables because of better efficiency
(less power is lost in the cable itself and power supply is more efficient).
See
Connector Index
for pinout of the standard cable required for PoE. All cables made to EIA/TIA 568A/B
cable specifications will work correctly with PoE. Note that this port supports automatic cross/straight cable
correction (Auto MDI/X), so you can use either straight or cross-over cable for connecting to other devices.
4
