background image

RouterBOARD 711

User's Manual

(20-Oct-2010)

Copyright

Copyright MikroTikls SIA. This manual contains information protected by copyright law. No part of it may be  
reproduced or transmitted in any form without prior written permission from the copyright holder.

Trademarks

RouterBOARD, RouterOS, RouterBOOT and MikroTik are trademarks of MikroTikls SIA. All trademarks and  
registered trademarks appearing in this manual are the property of their respective holders.

Limited Warranty

Copyright   and   Trademarks

.   Copyright   MikroTikls   SIA.   This   manual   contains   information   protected   by 

copyright law. No part of it may be reproduced or transmitted in any form without prior written permission  
from the copyright holder. RouterBOARD, RouterOS, RouterBOOT and MikroTik are trademarks of MikroTikls 
SIA. All trademarks and registered trademarks appearing in this manual are the property of their respective 
holders. 

Hardware. MikroTik warrants all RouterBOARD series equipment for the term of fifteen (15) months from the  
shipping date to be free of defects in materials and workmanship under normal use and service, except in 
case   of   damage   caused   by   mechanical,   electrical   or   other   accidental   or   intended   damages   caused   by  
improper use or due to wind, rain, fire or other acts of nature.

To return failed units to MikroTik, you must perform the following RMA (Return Merchandise Authorization)  
procedure. Follow the instructions below to save time, efforts, avoid costs, and improve the speed of the  
RMA process.

1.If   you   have   purchased   your   product   from   a   MikroTik   Reseller,   please   contact   the   Reseller   company 
regarding   all   warranty   and   repair   issues,   the   following   instructions   apply   ONLY   if   you   purchased   your 
equipment directly from MikroTik in Latvia.

2.   We   do   not   offer   repairs   for  products   that   are   not  covered   by  warranty.   Exceptions   can   be   made   for  
RB1000.

3. Out-of-warranty devices and devices not covered by warranty sent to Mikrotikls will be returned to the 
sender at sender's cost.

Instructions are located on our webpage here: 

http://rma.mikrotik.com

 

Manual

. This manual is provided “as is” without a warranty of any kind, expressed or implied, including, but 

not   limited   to,   the   implied   warranty   of   merchantability   and   fitness   for   a   particular   purpose.   The 
manufacturer has made every effort to ensure the accuracy of the contents of this manual, however, it is 
possible that it may contain technical inaccuracies, typographical or other errors. No liability is assumed for  
any   inaccuracy   found   in   this   publication,   nor   for   direct   or   indirect,   incidental,   consequential   or   other  
damages  that  may result  from  such   an  inaccuracy,  including,  but  not  limited  to,  loss  of   data  or  profits. 
Please report any inaccuracies found to [email protected]

Содержание RouterBOARD 711









Отзывы: