MikroTik RouterBOARD 411 Скачать руководство пользователя страница 1

RouterBOARD 411

User's Manual

Rev. A (31-Jan-2008)

Copyright

Copyright  ©  2003-2008  MikroTikls  SIA.  This  manual  contains  information  protected  by  copyright  law.  No 

part of it may be reproduced or transmitted in any form without prior written permission from the copyright 

holder.

Trademarks

RouterBOARD,  RouterOS,  RouterBOOT  and  MikroTik  are  trademarks  of  MikroTikls  SIA.  All  trademarks  and 

registered trademarks appearing in this manual are the property of their respective holders.

Limited Warranty

Hardware

. MikroTikls SIA warrants all RouterBOARD 411 series equipment for the term of one year from 

the shipping date to be free of defects in materials and workmanship under normal use and service. All parts 

will  be  repaired  or  replaced  with  similar  or  functionally  equivalent  parts  by  MikroTikls  SIA  during  the 

warranty term, except in case the returned parts have mechanical, electrical or other accidental or intended 

damages caused by improper use or due to wind, rain, fire or other acts of nature.

Parts  (or  systems)  must  be  shipped  pre-paid  to  our  facility  in  Riga,  Latvia.  All  items  must  have  a  Return 

Material Authorization (RMA) which you can get by contacting us via email, telephone or fax. RMA must be 

printed,  signed,  and  enclosed  with  the  shipment,  also  the  RMA  number  must  be  written  on  the  package 

itself.  Parts  sent  without  following  the  proper  procedure  will  be  treated  as  those  not  to  be  repaired  or 

replaced  due  to  the  above  mentioned  conditions.  Items  proved  to  be  free  of  defects  in  our  lab  will  be 

returned to the customer at the customer's expense. Those that do meet the warranty repair requirements 

will be repaired or replaced, and returned to the customer's location at our expense, extending the warranty 

term for the time the items are being shipped to and from our facility and replaced or repaired.

Manual

. This manual is provided “as is” without a warranty of any kind, expressed or implied, including, but 

not limited to, the implied warranty of merchantability and fitness for a particular purpose. The manufacturer 

has made every effort to ensure the accuracy of the contents of this manual, however, it is possible that it 

may contain technical inaccuracies, typographical or other errors. No liability is assumed for any inaccuracy 

found  in  this  publication,  nor  for  direct  or  indirect,  incidental,  consequential  or  other  damages  that  may 

result  from  such  an  inaccuracy,  including,  but  not  limited  to,  loss  of  data  or  profits.  Please  report  any 

inaccuracies found to 

[email protected]

.

Содержание RouterBOARD 411










Отзывы: